Engine Oil Change - KYMCO Stryker 125 User Manual

(6) ENGINE OIL CHANGE

1. Place the motorcycle on its main stand on level
ground.
2. Remove the oil dipstick.
3. Remove the drain bolt to drain the oil.
4. Refill fresh engine oil for 0.9 liter. Firmly tighten
the oil dipstick.
5. Warm up the engine and check the oil level again
after the engine is stopped for 20～30 seconds.
Specified Oil: SAE 15W40#
Drain Screw
Oil Strainer
CAUTION:
When changing the engine oil, also clean the oil
strainer and reinstall it.
Use the specified engine oil.
Change engine oil at first 300km and then change
it at every 2000km.
Engine oil will deteriorate easily and require
more frequent change if the motorcycle is often
ridden in dusty and cold areas or ridden for short
distance.
Do not mix engine oil of different classes or
viscosities. It may cause damage to engine.
- 33 -
Decrease Play
Increase Play