Engine Oil Change - KYMCO Quannon 125 Driver Manual

(5) ENGINE OIL CHANGE

1.Place the motorcycle onto the lifter.
2.Remove the oil dipstick.
3.Remove the drain bolt to drain the oil.
4.Refill fresh engine oil for 1.0 liter. Firmly tighten the oil
d ipstick.
5.Warm up the engine and check the oil level again after
the engine is stopped for 20 30 seconds.
Specified Oil: SAE 15W-40
Capacity/Exchanging Capacity:1.0L/0.9 L
CAUTION:
When changing the engine oil, also clean the oil
strainer nd reinstall it. a
Use the specified engine oil.
Change engine oil at first 300km and then change it
at ev ery 2000km.
Engine oil will deteriorate easily and require more
frequent change if the motorcycle is often ridden in
dusty and cold areas or ridden for short distance.
Do not mix engine oil of different classes or
viscosities. It may cause damage for engine.
～
44
Drain Screw