Installation Steps; Package Contents - EverFocus EAN900 Installation Manual

This installation guide provides instructions for installing the EAN900 IP Camera. For
all other aspects of using this product, please refer to EAN900 User's Manual, which
is available on the CD included in this package.

Installation steps

1. Confirm that all of the accessories have been supplied with the network camera
from the list below.
2. Confirm that your PC answers to the minimum computer requirements listed
below.
3. Setting up the hardware connection. Please see "Setting Up the Hardware
Connection" on page 4.
4. Network Connection. 3 typical types of network connection. Please see "Network
Connection" on page 7.
5. Set an IP address. Please see "Assign IP address" on page 9.

Package Contents

- Network camera (x1)
- Accessory packet (x1)
C adaptor mount ring
SD card cover bracket + 1 screw
Fixing block (fixes to back panel for holding power cable) + 2 screws
Hexagon wrench
2
EAN900