EverFocus EZN Series User Manual
  1. Manuals
  2. Brands
  3. EverFocus Manuals
  4. Security Camera
  5. EZN Series
  6. User manual

EverFocus EZN Series User Manual

Value ip series network camera 2mp/5mp/8mp, h265, ir & wdr
Hide thumbs Also See for EZN Series:
Table of Contents

Advertisement

Quick Links

Value IP Series Network Camera
2MP/5MP/8MP, H265, IR & WDR
User's Manual
EZN Series
EHN Series
Copyright © EverFocus Electronics Corp.
Release Date: January, 2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the EZN Series and is the answer not in the manual?

Questions and answers

Related Manuals for EverFocus EZN Series

Summary of Contents for EverFocus EZN Series

  • Page 1 Value IP Series Network Camera 2MP/5MP/8MP, H265, IR & WDR User’s Manual EZN Series EHN Series Copyright © EverFocus Electronics Corp. Release Date: January, 2019...
  • Page 2 Copyright All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form or by any means without written permission of the EverFocus Electronics Corporation. EverFocus 2F., No.12, Ln. 270, Sec. 3, Beishen Rd., Shenkeng Dist.,...
  • Page 3 - Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment, not expressly approved by EverFocus or parties authorized by EverFocus could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:...
  • Page 4 Precautions Do not install the camera near electric or magnetic fields. Install the camera away from TV/radio transmitters, magnets, electric motors, transformers and audio speakers since the electromagnetic fields generated from these devices may distort the video image or otherwise interfere with camera operation. Never disassemble the camera beyond the recommendations in this manual nor introduce materials other than those recommended herein.

  • Page 5: Table Of Contents

    Dimensions ........................... 5 Cables ............................5 Installation………………………………………………………………………………………………………………………. 7 EHN Series ............................. 7 EZN Series ............................. 9 Accessing the Camera……………………………………………………………………………………………………… 10 Checking the Dynamic IP Address ....................10 Settings for Microsoft Internet Explorer ..................12 Connecting the Camera to the Network ..................13 Live View Window………………………………………………………………………………………………………….
  • Page 6 5.5.1 Network .......................... 32 5.5.2 Video Streaming ......................34 5.5.3 Email ..........................35 5.5.4 DDNS ..........................36 5.5.5 IP Filter ..........................37 5.5.6 RTSP ..........................38 5.5.7 FTP ..........................39 5.5.8 SNMP ..........................40 5.5.9 HTTPS ..........................40 5.6 Storage Setting..........................41 5.6.1 Storage ..........................

  • Page 7: Introduction

    The Value IP series conforms to ONVIF for compatibility with other network video devices. You can also use EverFocus Mobile applications to remotely view the live views of the cameras through your iOS or android handheld devices; or use EverFocus CMS to remotely manage multiple IP devices connected on the network.

  • Page 8: System Requirement

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP System Requirement Before installing, please check that your computer meets the following system requirements. Operating System:  32/64-bit: Windows 7, Windows 8, Windows 2008 32-bit: Windows 2003, Window XP, Windows 2000 CPU: Intel Core Duo II dual-core processor or higher ...

  • Page 9: Packing List

    2. Contact the shipper if any items appear to have been damaged in the shipping process. Optional Accessory You can go to the product page on EverFocus’ website to check the related optional accessories. Please click Accessories on each Product page on EverFocus Website...

  • Page 10: Physical Description

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Physical Description EHN Series EZN Series No. Item Name Descriptions Light Sensor Detects lights. IR LEDs IR LEDs for infrared illumination in night vision applications. Lens Camera Lens.

  • Page 11: Dimensions

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Dimensions EHN Series EZN Series Ø 83.58mm / 3.29" 241.18mm / 9.5" Ø 147mm / 5.79" Cables The cables provide connections for network, BNC video output, power, audio input / output and alarm input / output.
  • Page 12 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Note: To activate Audio function, the Audio function must be enabled please refer to 5.5.2 Video Streaming. Alarm IO PIN Assignment Alarm In Alarm Out Reset Button The Reset Button can be used to restore the camera to factory default. When the camera is powered up, press the Reset Button about 8 seconds to reboot the camera.

  • Page 13: Installation

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Installation EHN Series 1. Stick the Installation Sticker on the surface to mark the 4 screw positions. Drill the 4 screw-depth holes on the surface and then push the supplied 4 Screw Anchors into the screw holes. Optionally drill the bottom 2 Cable Holes if you want to run the cables through the surface.
  • Page 14 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 6. Connect the camera to the network using the supplied Cable Gland Kit. a. Insert a RJ-45 network cable (without the RJ-45 connector on the one end) through the supplied Waterproof Ring, Cable Gland, Stopper and Screw Cap accordingly.

  • Page 15: Ezn Series

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP EZN Series 1 Optionally insert a micro SD card into the card slot on the rear panel of the camera. To do this, unscrew the 2 screw, remove the SD card slot cover and then insert the micro SD card.

  • Page 16: Accessing The Camera

    You can look up the IP address of the IP camera using the IP Utility (IPU) program, which is included in the Software CD. The IP Utility can also be downloaded from EverFocus’ Website (Support > Download > Keyword Search: IP Utility): http://www.everfocus.com.tw/download/...
  • Page 17 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 3. To access the Live View window, double click the IP address in the IP Address column, the Password window pops up. By default, the ID is admin and there is no password. Please input a password for the first-time login.

  • Page 18: Settings For Microsoft Internet Explorer

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Settings for Microsoft Internet Explorer If you have difficulties viewing live view or upgrading firmware, it is suggested to complete the following settings of your computer. 1. If your PC or laptop is running with Windows, it’s required to run the browser as administrator when first entering the camera live view.

  • Page 19: Connecting The Camera To The Network

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Connecting the Camera to the Network There are three methods to connect the IP camera to the network: Router or LAN Connection, One-to-One Connection and Direct High-Speed Connection. Router or LAN connection This is the most common connection in which the IP camera is connected to a router and allows multiple users on and off site to see the IP camera on a LAN / WAN (Internet).
  • Page 20 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Direct High-Speed Connection In a Direct High-Speed Connection, the camera connects directly to a modem without the need for a router. You need to set the static or dynamic WAN IP address assigned by your ISP (Internet Service Provider) in the camera’s configuration web pages.

  • Page 21: Live View Window

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Live View Window No. Name Description Live Click to display the Live View window. Playback Click to enter the Playback page. Please refer to 5.1 Playback. Display Click to enter the Display setting page. Please refer to 5.2 Display Setting. Record Click to enter the Record setting page.

  • Page 22: Playback

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Playback Click the Playback button on the top navigation bar. The Playback window displays. You can play back the recordings stored in the on-camera micro SD card. To start playing back: 1.

  • Page 23: Playback Panel

    Folder to open the folder to find the recording file. To change the manual record storage path or the file format, please refer to 5.7.7 Local Settings. You can use EverFocus Player or any player supporting the video format to Video Clips play back the recordings.

  • Page 24: Download

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Original Aspect Ratio Click to play back all the streams with original aspect ratio. Stretch Click to stretch all the streams on the Playback window. Click to display the Playback window in full screen mode. To exit full screen Full Screen mode, press the ESC button on the keyboard or double-click on the screen.

  • Page 25: Display Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Display Setting Click the Display button on the top navigation bar to enter the Display Setting page. 5.2.1 Live You can configure the live display settings on this page. Name: Input a camera name.

  • Page 26: Image

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.2.2 Image You can configure the image settings on this page. Day/Night Mode: Select a Day/Night mode for the camera to display the color or B/W images. • Auto: Select Auto for the camera to automatically switch to day or night mode. You can further set up a Delay Switch time (second) in the below field.
  • Page 27 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Hallway Mode: Switch the button to the right to enable the Hallway Mode function. This function allows users to monitor vertically-oriented areas such as hallway, corridors and aisles. Please refer to 5.2.2.1 Hallway Display for more details.

  • Page 28: Hallway Display

    To achieve the best 9:16 display effect, it is recommended to: 1. Rotate the camera sideways by 90°: For EHN Series: For EZN Series: Rotate the camera to the left or right by 90°. Loosen the Rotate Screws on both sides and rotate the camera to the left or right by 90°.

  • Page 29: Privacy Mask

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.2.3 Privacy Mask You can configure the Privacy Mask settings on this page. The Privacy Mask can block out sensitive areas from view, covering the areas in both Live View and Recordings. This feature is useful when users don’t want the sensitive information visible.

  • Page 30: Audio

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.2.4 Audio You can configure the audio settings on this page. Enable Audio: Switch the button to the right to enable audio configuration. Note: If you want to enable the Audio function, after configuring the Audio configuration on this page, please turn on the Audio function on the Video Streaming page (please refer to 5.5.2 Video Streaming).

  • Page 31: Roi

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.2.5 You can configure the ROI settings on this page. Bitrate: Select a stream type to be applied with the ROI bitrate. ROI ID: Up to 8 ROI areas can be configured for each stream type. Enable ROI: Select Enable to enable the configured ROI area(s).

  • Page 32: Record

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Record 5.3.1 Record Setting You can configure the record settings on this page. Please note that to enable the record function, a micro SD card has to be inserted to the IP camera in advance. Please also format the micro SD card for the first-time use (refer to 5.6.1 Storage).

  • Page 33: Record Schedule

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.3.2 Record Schedule After setting up the Record settings, you can configure the record schedule on this page. Normal: Move your mouse cursor over the schedule time blocks. The first line of the time block on each day is the Normal time blocks.

  • Page 34: Alarm Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Alarm Setting 5.4.1 Motion You can configure the motion settings on this page. Enable: Switch the button to the right to enable the Motion function. Sensitivity: Select a sensitivity for the motion detection. The larger the value, the higher the sensitivity. Alarm Out: Switch the button to the right to enable the alarm output, and then further configure the Timeout Duration below.

  • Page 35: I/O

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.4.2 After connecting the external I/O devices to the camera, you can configure the I/O settings on this page. Alarm Type: Select an alarm type for the alarm input. Options include Normally-Open, Normally-Close and Off. Timeout Duration: After enabling the Alarm Out, select a timeout duration for the alarm output.

  • Page 36: Tamper Alarm

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.4.3 Tamper Alarm You can configure the tamper alarm settings on this page. Enable: Switch the button to the right to enable the Tamper Alarm function. Sensitivity: Select a sensitivity for the tamper detection. The larger the value, the higher the sensitivity. Send Email: Switch the button to the right to enable the Email alert function.

  • Page 37: Sound Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.4.4 Sound Detection You can configure the sound detection settings on this page. For this function to work, an external audio device has to be connected to the camera to detect audio. Enable: Switch the button to the right to enable the Sound Detection function.

  • Page 38: Network Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Network Setting 5.5.1 Network You can configure the network settings on this page. Type: Select a network type. DHCP: This setting lets the system use an automatically assigned (dynamic) IP address. This address can •...
  • Page 39 P2P Switch: Check the box to enable the P2P function. If P2P function is enabled, a QR code will be displayed on the System Info page (System > Info). You can scan the QR code with EverFocus VANGUARD App installed on your mobile device to add and remote access the IP Camera.

  • Page 40: Video Streaming

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.2 Video Streaming You can configure the video streaming settings on this page. You can configure the below configurations to Main Stream, Sub Stream and Mobile Stream. Resolution: Select a resolution. FPS: Select a frame rate per second for the selected stream type.

  • Page 41: Email

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.3 Email You can configure the email settings on this page. Email: Switch the button to the right to enable the Email function. Encryption: Select an encryption if your Email server requires the SSL or TLS verification. Select Auto if you are not sure.

  • Page 42: Ddns

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.4 DDNS You can configure the DDNS setting on this page. DDNS (Dynamic Domain Name System) is a service used to map a domain name to the dynamic IP address of a network device. You can set up the DDNS service for remote access to the IP Camera.

  • Page 43: Ip Filter

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.5 IP Filter You can configure the IP Filter settings on this page. This function allows you to allow or deny some specific IP address to access the IP Camera. By default, all IP addresses are allowed to access the camera. To set up IP filtering: 1.

  • Page 44: Rtsp

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.6 RTSP You can enable the RTSP function on this page. RTSP Enable: Switch the button to the right to enable the RTSP function. RTSP Port: The RTSP port allows the IP Camera to transmit real-time streaming to other devices (e.g. using a streaming media player).

  • Page 45: Ftp

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.7 You can configure the FTP settings on this page. When an alarm is triggered, the IP Camera will send an instant snapshot image to the FTP. FTP Enable: Switch the button to the right to enable the function. Server: Input the FTP server IP.

  • Page 46: Snmp

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.5.8 SNMP You can configure the SNMP settings on this page. Select a SNMP version and input the configurations. Click the Apply button to apply the settings. 5.5.9 HTTPS You can configure the HTTPS settings on this page.

  • Page 47: Storage Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Storage Setting 5.6.1 Storage You can configure the SD card storage on this page. After inserting an micro SD card to the card slot, the IP camera will automatically detect the capacity of the on-camera SD card. Overwrite: Select Auto to enable the overwrite function.

  • Page 48: Cloud Storage

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.6.2 Cloud Storage You can configure the cloud storage (Dropbox) settings on this page. After configuring the settings, the IP camera will automatically send the alarm snapshot images to the associated Dropbox when alarm events occur. To perform the Cloud function: 1.
  • Page 49 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP b. Input the username and password of the IP camera. c. When this message appears, you are able to use the Cloud function. Note: For the Cloud Storage function to work, after configuring the Cloud Storage settings, you will have to enable the Send to Cloud function on the Motion (see 5.4.1 Motion) and I/O (see 5.4.2 I/O) alarm setup page.

  • Page 50: System Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP System Setting 5.7.1 General You can configure the system general settings on this page. System Time: Set up a system date and time. Date Format: Select a format for the date. Time Format: Select a format for the time.
  • Page 51 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 【NTP Settings】Select NTP and then configure the below settings. The NTP (Network Time Protocol) function allows your IP camera to automatically sync its clock with a time server. This gives it the ability to constantly have an accurate time setting (your IP camera will periodically sync automatically).

  • Page 52: User Account

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.7.2 User Account You can configure the user account settings on this page. Up to 7 user accounts (1 administrator and 6 users) can be configured. To edit the user privileges: 1.
  • Page 53 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 3. You can configure the user name/password in the right-side field. In the Active field, switch to the right to enable the user account. At the bottom Password field, switch to enable the password (if Disable is selected, the user can login without password).

  • Page 54: Firmware Upgrade

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.7.3 Firmware Upgrade You can upgrade IP camera firmware on this page. Click the Browse button to select the firmware file from the computer. Click the Start button to start upgrading IP camera. 5.7.4 Load Default You can load system default settings on this page.

  • Page 55: System Reboot

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.7.5 System Reboot This menu allows the IP camera to auto reboot regularly. It is recommended to leave this function enabled, as it maintains the operational integrity of your IP camera. Switch the Reboot Schedule button to the right to enable the function.

  • Page 56: Local Settings

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.7.7 Local Settings You can configure the local storage path on this page. Record Path: Select a storage path for recordings. Download Path: Select a storage path for download recordings. Snapshot Path: Select a storage path for snapshot images.

  • Page 57: Log

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.7.8 You can view log information on this page. Select the log types, start time, end time, and then click the Search button, the searched logs will be displayed on the list below.

  • Page 58: Info

    If P2P function has been enabled, a QR code will be displayed on the Info page. You can scan the QR code with EverFocus VANGUARD App installed on your mobile device to add and remote access the IP camera. To enable the P2P function, please refer to P2P Switch in 5.5.1 Network.
  • Page 59 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 2. To add an IP camera through P2P, tap Menu > Device List, and then tap the Add button on the upper-right corner. 3. Scan the IP camera’s QR code on the info page of the IP Camera Web interface. Input the IP camera password and Media Port 9988.
  • Page 60 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 4. The IP camera is now added and connected to the App. You can start accessing the IP camera. EZN1250: Channel01[P2P]...

  • Page 61: Intelligent Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Intelligent Setting 5.8.1 Record Schedule You can configure record schedule for intelligent detection on this page. In order to active the intelligent recording function, you need to configure the schedule recording for intelligent detection events. The schedule will be activated 24 hours a day, 7 days a week.

  • Page 62: Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.2 Detection You can configure intelligent detection on this page. The intelligent detection functions include Perimeter Intrusion Detection, Line Crossing Detection, Object Detection, Pedestrian Detection, Face Detection and Cross Counting.
  • Page 63 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Send Email: Switch the button to the right to enable the Email alert function. When a Perimeter Intrusion event is triggered, the camera will send an email alert with a snapshot image to the pre-configured Email receiver. Note that for this function to work, you have to set up the Email function in advance (refer to 5.5.3 Email).

  • Page 64: Line-Crossing Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.2.2 Line-Crossing Detection When objects (people, vehicle or other objects) cross a pre-defined line, the Line-Crossing Detection event will be triggered. You can configure some event actions like event recording, alarm output or Email alert when an event is triggered.
  • Page 65 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP To configure the Line-Crossing Detection function: 1. Select 1 from the Rule Number drop-down list to configure the first line. Up to 4 lines can be configured. 2. Enable the Rule Switch and then define a Rule Type: AB: Detects movement from A to B.

  • Page 66: Object Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.2.3 Object Detection When IP Camera detects missing objects and foreign objects in a pre-defined area, the Foreign/Missing Object Detection event will be triggered. You can configure some event actions like event recording, alarm output or Email alert when an event is triggered.
  • Page 67 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP To configure the Foreign/Missing Object Detection function: 1. Select 1 from the Rule Number drop-down list to configure the first area. Up to 4 areas can be configured. 2.

  • Page 68: Pedestrian Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.2.4 Pedestrian Detection Only 5MP and 8MP models support this function. When IP Camera detects pedestrian in a pre-defined area, the Pedestrian Detection event will be triggered. You can configure some event actions like event recording, alarm output or Email alert when an event is triggered.
  • Page 69 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Click Refresh to refresh the page; click Apply to save the settings. To configure the Pedestrian Detection function: 1. Select 1 from the Rule Number drop-down list to configure the first area. 2.

  • Page 70: Face Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.2.5 Face Detection Only 5MP and 8MP models support this function. When IP Camera detects faces in a pre-defined area, the Face Detection event will be triggered. You can configure some event actions like event recording, alarm output or Email alert when an event is triggered.
  • Page 71 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Enable Recording: Switch the button to the right to enable the Face Detection recording function. Note that for Face Detection recording function to work, the Record Schedule function has to be configured (please refer to 5.8.1 Record Schedule).

  • Page 72: Cross-Counting Detection

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.2.6 Cross-Counting Detection Only 5MP and 8MP models support this function. The camera will count the times when objects (people, vehicle or other objects) cross a pre-defined line, and the Cross-Counting Detection event will be triggered. You can configure some event actions like event recording, alarm output or Email alert when an event is triggered.
  • Page 73 Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP To configure the Line-Crossing Detection function: 1. Select 1 from the Rule Number drop-down list to configure the line. 2. Enable the Rule Switch and then define a Rule Type: AB: Detects movement from A to B.

  • Page 74: Analysis

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP 5.8.3 Analysis You can search and view the statistical result of the intelligent analysis with list, histogram or line chart format. You can also export the analysis report to your computer. Analysis Record Schedule Search...

  • Page 75: Color Setting

    Value IP Series Network Cameras – H265, 2MP / 5MP / 8MP Color Setting You can adjust Hue, Brightness, Contrast, Saturation and Sharpness value using the Color Panel. Click the Default button to restore all the value to factory default. On the Live View window, click the Color button to display the Color Panel.

  • Page 76: Live View Function Icons

    Click Folder to open the folder to find the recording file. To change the storage path or the file format, please refer to 5.7.7 Local Settings. You can use EverFocus Player or any player supporting the video format to play Video Clips back the recordings.
  • Page 77 TEL: +1 626 844 8888 FAX: +1 626 844 8838 www.everfocus.com sales@everfocus.com Ihr EverFocus Produkt wurde entwickelt Your EverFocus product is designed and und hergestellt mit qualitativ manufactured with high quality materials hochwertigen Materialien und and components which can be recycled Komponenten, die recycelt und wieder and reused.

This manual is also suitable for:

Ehn seriesEhn1250Ezn1240Ezn1250Ehn2540Ehn2550 ... Show all

Table of Contents