Sms Commands - JabloCom EYE-02 User Manual

JabloTool DESKTOP software
Load the installation CD to your computer, start the "INSTALL.EXE" and follow the program instructi-
ons.
Do not connect the EYE-02 camera to the USB on your computer until you have finished instal-
ling the JabloTool software from the CD!
The latest version of the installation software can be downloaded
at www.jablotool.com/download.
Turn the camera On and connect it to the computer by the USB cable. Wait until the
operating system recognizes the camera. Then, click on the JabloTool icon on the
desktop to load the program and follow all instruction on the screen.
The maximum length of a USB cable is usually 5 meters. If your EYE-02 camera is too far, you
may need to remove it temporarily from its location or bring your PC nearer.
 JabloTool WEB server
JabloTool WEB is a service at www.jablotool.com and it is provided for free for registered users.
User accessing its EYE-02 camera trough the JabloTool WEB will be guided to establish the connection
to the camera. If the user is not registered or if the EYE-02 camera is not protected by Remote Access
Password, the user will have to send a special SMS authorization command from his mobile phone first
to initiate the EYE-02 camera connection to the JabloTool.
Authorization between the JabloTool WEB server and EYE-02 camera

4.2 SMS Commands

Basic EYE-02 camera functions can be operated by the text message (SMS) commands sent to the ca-
mera. Commands are accepted only when sent from a mobile phone number stored in the contact list.
If the EYE-02 camera is protected by the Remote Access Password or the Configuration Password,
each SMS must be introduced with the appropriate password. Using the password the camera can be
operated from any phone.
Please note passwords and commands are case insensitive.
JR_EYE-02.ENG.MAN.Manual.12.D - 9 -