Config Commands - JabloCom EYE-02 User Manual

 Control commands
Control commands report or change the camera state.
COMMAND
Switch EYE-02 camera to the
Example:
WATCH If the camera remote access is protected by the password MIKE, the command must be
send as:
Camera will confirm the message with a status SMS.
SLEEP
Switch EYE-02 camera to the
EYE-02 camera will return an SMS indicating the current camera status.
Example:
STATUS
The EYE-02 camera will return a multimedia message with the picture of the current scene
PICTURE
in front of the camera.
REPORT SMS The EYE-02 camera sends a report of the 10 latest events . Camera sends up to 5 SMS.
REPORT MMS EYE-02 camera sends an MMS with the last alarm event recorded in the camera history.
This command is especially for the prepaid SIM cards. The EYE-02 camera will return a text
message with information about the current credit on your SIM card. This function is provi-
CREDIT
ded by your network operator and might not work correctly on some networks.
<USSD>
After the first using of this command camera keeps the USSD part. It's possible to send
CREDIT command only since then.
HELP Camera will return a text message with a list of the SMS commands.
Command is for connecting the camera to the JabloTool server. Server describes detailed
WEB
syntax for the command.
If the camera is enrolled to a wireless relay, this command switches its programmable out-
put. Parameters are ON and OFF. If you like to make a pulse on output, send the command
SwitchX
ON <time in seconds>.
_______
Please see chapter OASiS wireless devices.
Example:
SwichY
Example:
Example:

 CONFIG commands

CONFIG commands change the EYE-02 camera settings. Camera confirms configuration commands
with an SMS.
COMMAND
CONFIG PROFILE
<profile>
CONFIG CONTACT
JR_EYE-02.ENG.MAN.Manual.12.D
WATC H
<Remote Access Password> WATCH
MIKE WATCH
S L EEP
Camera EYE-02 status: SLEEP mode, Time: 12/11/2009 13:56:31,
SwitchX : Off, SwitchY: On
SwitchX ON
<Configuration Password> SwitchY OFF
SwitchX ON 30
Profile setting, <profile> is
Example: CONFIG PROFILE SHOP
Example: <Configuration Password> CONFIG PROFILE HOME
Camera will switch to theprofile
Add a new contact.
Example: CONFIG CONTACT MyEmail@domain.com
The e-mail address myemail@domain.com will be added to the EYE-02 camera
contact list, ALARM reports will be sent to this e-mail address including the video
records.
Example: <Configuration Password> CONFIG CONTACT +420774770123
The phone number +420 774 770 123 will be added to the EYE-02 camera contact
list. ALARMs will be reported to this phone number in accordance with default
settings via voice call and MMS..
DESCRIPTION
mode.
mode.
Switches on the PGX output of the wireless relay
Switches on the PGX output for 30 seconds
DESCRIPTION
H O ME OU T D O O R G AR AG E
, ,
Camera will switch to the profile
H O ME
- 10 -
.
S H O P C ARE
, or
S H O P