Firmware Recovery Menu - Monster Go-DJ Manual And Warranty

FIRMWARE

Firmware Recovery Menu

In the recovery menu screen, you can rotate the FX SELECT knob to select
a menu item.
You can press the FX SELECT knob to execute the selected menu command.
For a Mandatory Firmware Update with an SD card, select and execute the
"Recovery from SD" command. If the firmware in the SD card is properly
installed, then the Monster GO-DJ
®
The firmware version is shown on the right side of the menu item.
™ will reboot.
The other menu item functions include the following:
• Normal Boot: Boots normally with the firmware currently installed
• Recovery from GO-DJ DRIVE: Reboots after installing the firmware
stored in the GO-DJ DRIVE
• USB mode: Starts to wait to be connected with a computer as well as
USB Storage Mode in the Options screen
• Initialize Database: Deletes the preserved data and settings
• Initialize Internal Disk: Deletes all files in the internal drive and resets
to factory default
• Power Off: Shuts down the Monster
GO-DJ ™
®
69