Arc Selector And Corresponding Functions - Monster Go-DJ Manual And Warranty

DIGITAL TURNTABLES SCREEN

Arc Selector and Corresponding Functions

The following table diagrams the Arc Selector position and the
corresponding functions:
Arc Selector Command When Pressing the FUnCTion Knob
Cue Clear Clear a selected CUE point. Once selected, all
(when white in color) colored hot-cue points (CUE 1, CUE 2, CUE 3, CUE 4)
will begin blinking.
Cue Clear Stops the blinking of the hot-cue points.
(when light blue in color)
CUE 1, CUE 2, CUE 3, or CUE 4 Record the current track position as a hot-cue point
(when white in color) for the corresponding cue point.
CUE 1, CUE 2, CUE 3, or CUE 4 Jump to the recorded hot-cue position.
(when in color other than white)
CUE 1, CUE 2, CUE 3, or CUE 4 Clear the recorded hot-cue position.
(when blinking)
Tap (when white in color) Measure the BPM that the user will tap on the
Digital Turntable.
Tap (when blinking) Adopt the BPM measured from the user tapping.
Loop (when white in color) Start looping using the selected loop range.
Loop (when light blue in color) Stop looping.
Loop Range Change the loop range.
36