Unanalyzed Files; Unsupported Files; File Browser Window For Recorded Files - Monster Go-DJ Manual And Warranty

FILE BROWSER SCREEN

Unanalyzed Files

When you load a file for the first time into the Monster
through the internal memory ("GO-DJ Drive") or the SD card memory, the
Monster GO-DJ ™ will analyze the tempo properties via Beats Per Minute
®
(BPM) analysis. When a file has not been analyzed, its BPM information is not
displayed in the File Select Screen. If you open File Properties window of an
unanalyzed file, file analysis will begin immediately. While the file is being
analyzed, the "Load" button is replaced by a progress bar labeled "Analyzing. "
Once the file analysis is complete, you can load the file on the Digital Turntable.

Unsupported Files

GO-DJ ™ , either When you try to open or load an unsupported file, its BPM is shown as 0 (or "---")
®
in the File Selection screen. If the file type is unsupported, you cannot load or
play the file. If the file type is unsupported, the ""Unsupported" message will be
displayed instead of the "Load" button in the File Properties window.

File Browser Window for Recorded Files

Files recorded by the Monster
which is located in the internal memory.
You can copy or delete the files by following these directions:
• Select a file in the "GO-DJ Rec" drive.
• When the file is selected, press the FUNCTION knob and hold it down
• When the File Browser Window appears, select "Delete" to delete the file
You cannot delete or copy a recorded file when the track is recording, while
the track is playing or while deleting or copying the file.
The other action items in the File Browser Window are used for the reset menu.
GO-DJ
®
for two (2) seconds.
or "Copy" to copy the file to the SD memory card.
are stored in the "GO-DJ Rec" drive,
™
26