Table of Contents
Advertisement
DIGITAL TURNTABLES SCREEN
how to Control Tracks
In the Digital Turntable screen, you can control the playback position, tempo
(BPM) and other functions on a loaded track file.
Arc Selector
The Arc Selector is located at the side of the digital turntable. On Track-A, the
Arc Selector is located just to the left of the Digital Turntable platter. On Track-B,
the Arc Selector is located just to the right of the Digital Turntable platter. The
Arc Selector is controlled by rotating and pressing the FUNCTION knob for
various functions.
How to Use the Function Knob in the Arc Selector
The FUNCTION knob can be used for the Arc Selector by following these
directions:
• Rotate the FUNCTION knob to move the highlight bar in the Arc Selector.
• Press the FUNCTION knob to execute a selected (highlighted) command
in the Arc Selector.
Hot-Cue Points
A hot-cue point is assigned when the selection bar in the Arc Selector
highlights either CUE 1, CUE 2, CUE 3 or CUE 4 and then the FUNCTION knob
is pressed down.
Hot-cue points can be assigned by following these directions:
• Locate the area of the track where you want to assign a hot-cue point
by rotating the Digital Turntable and/or tapping on the progress bar.
• Use the FUNCTION knob to select which hot-cue point that you want
to assign the location to (CUE 1, CUE 2, CUE 3, CUE 4).
• Press the FUNCTION knob to assign and record the hot-cue point.
Please note: If you select a hot-cue point that is listed in white by pressing
the FUNCTION knob during playback, the corresponding playback position
is recorded as a hot-cue point. In the case of a hot-cue point labeled with
colored text (other than white), pressing the FUNCTION knob enables you
to jump to the recorded hot-cue point.
34
Hide quick links:
Advertisement
Table of Contents
