Reset Menu - Monster Go-DJ Manual And Warranty

FILE BROWSER SCREEN

Reset Menu

Analyzed data and/or parameters for selected track files can be reset by selecting
a storage directory (SD Card, GO-DJ Drive, GO-DJ Rec) and then pressing down
and holding the FUNCTION knob.
In the pop up window, the following commands can be selected:
• Discard BPM: Deletes the BPM and beat positions data.
• Reset Gain: Deletes a saved or customized gain value in the Equalizer screen.
• Clear Cues: Clears all hot-cue points (i.e., CUE 1, CUE 2, CUE 3, CUE 4).
• Clear Play Count: Deletes the data for the number of plays and the date
that the track was last loaded and played.
Please note the following:
• If you perform a reset action on a directory or a storage location, the
information about all the files in the directory or storage location are
deleted. In this case, if you press down the FUNCTION knob in while the
Reset function is processing, the Reset action is canceled, but the finished
data are not restored and some data can be partially lost.
• If you execute the "Discard BPM" command, then the beat position
and BPM are discarded. This can trigger the automatic BPM analysis of
the files, just as though the tracks were loaded on the Monster
for the first time.
• If you execute the "Clear Play Count" command, the file markers, such as
the white dot icons, in the File Browser Screen are cleared as well as the
date of the last play and the play count in the File Properties window.
• If the reset menu is opened for any of the files located in the "GO-DJ Rec"
directory, the dedicated actions for the recorded files are displayed in the
same window. Scrolling and selecting an action can be done by rotating
and pressing the FUNCTION knob.
• In order to delete all analysis data and corresponding values from the
database, you can execute the "Initialize Database" command in the
firmware recovery menu.
GO-DJ ™
®
32