GETTING STARTED
how to Turn on
To turn on the Monster
GO-DJ
™
®
to two (2) seconds. The power button is located at the right side of the Monster
GO-DJ
™
. If the battery power is too low for the Monster
you will see a message that states "Low Battery. "
Power States
The Monster
GO-DJ
has three power states: ON, OFF, and Standby. These are
™
®
switched with the power button.
Power button push
(more than 1 second)
Power OFF
Please note: In the Standby state, the displays turns off and the operations
with a touch panel, buttons and knobs are all invalid. However, music playback
does not stop, and the crossfader operation is still valid.
how to Charge
When the Monster
GO-DJ
™
battery power level is low, you can charge the
®
battery power by either of these two methods:
1 .
Charge by connecting to the Monster
2 .
Charge by connecting the Monster
power source, such as a computer.
, press and hold the power button for one (1)
GO-DJ
™
®
Power button push
(more than 1 second)
Power ON
Power button
GO-DJ
Power Adapter.
™
®
GO-DJ
™
Connector Cable to a USB
®
Screen Modes
The Monster
In Minimum Mode there are 3 screens of functionality. In Advanced Mode there
®
to power on,
are six screens of functionality
The default setting for the Monster
to Minimum Mode, go to the Options Screen, select System and toggle the
option for Minimum Mode. The Monster
Minimum Mode.
Available on-Screen information
Minimum Mode
In Minimum Mode The Monster
Standby
• Combination of minimum Digital Turntable and minimum File
Browser Screen
• Volume Control
• Options Screen
GO-DJ
™
has two different screen modes: Minimum and Advanced.
®
GO-DJ™ is Advanced Mode. To switch
®
GO-DJ™ system will then reboot in
®
GO-DJ
™
has three (3) screens
®
14