Monster Go-DJ Manual And Warranty page 40

DIGITAL TURNTABLES SCREEN
Recorded hot-cue points are preserved even after the unloading of the track
file, a shutdown of the Monster
®
Recorded hot-cue points can be cleared with the CUE CLEAR command
by following these directions:
• Use the FUNCTION knob to select the CUE CLEAR command on the
Arc Selector.
• Press the FUNCTION knob to activate the CUE CLEAR command.
You will notice that the recorded hot-cue points (recognizable by
the colored text) will begin flashing.
• Use the FUNCTION knob to select which hot-cue point will be cleared.
• Press the FUNCTION knob to clear the recorded position of the
hot-cue point.
GO-DJ and/or the reset of the settings.
™
Loop
Any portion of the track can be looped by using the loop function in the
Arc Selector by following these directions:
• Use the FUNCTION knob to select the specific loop range that you want
to activate.
• Press the FUNCTION knob to activate the loop function. Depending on
what is selected on the Options screen, the loop function will stop when
the FUNCTION knob is pressed again, released or rotated.
• Select the "Loop Range" command on the Arc Selector to change the loop
range, which ranges from ¹ ∕ ₈ beats to 32 beats.
Please note: During a loop function, the Digital Turntable will activate the
LOOP ADJUST mode, which is signified by the left and right arrows located in
the center of the Digital Turntable. Use the Loop Adjust function to change the
position of loop range. You can select various options on how to change the
loop range in the Options screen.
35