Volume Control Of External Inputs; Real-Time Bpm Analysis - Monster Go-DJ Manual And Warranty

SAMPLERS SCREEN

Volume Control of External Inputs

Press and rotate the VOLUME-A knob to changes the microphone volume.
Slide the "Line In amp volume" slider in the Options screen to changes the
volume level of the audio coming in from the Line-In jack.
Please note: If you select "Line" from "Microphone type" on the DEVICE(1) tab
in the Options screen, the microphone amplifier (mic amp) is turned off. You
can then use line level input or a pre-amped microphone on the MIC terminal.
In this case, the microphone volume and the line-in volume are both applied
to the input from the MIC jack.

Real-Time BPM Analysis

When the LINE-IN or MIC is assigned to a Digital Turntable, the Monster
applies real-time BPM and beat analysis to the incoming audio. The results
of the real-time BPM and beat analysis are displayed in the BPM window, and
the beats are monitored visually with the Beat LED.
When the music title is changed or the results are not correct, press and hold
the CUE button of the assigned track to reset the analysis engine. You can also
modify the BPM manually in Tap mode of the Digital Turntable.
GO-DJ ™
®
57