Off Mode; Loop Adjust Mode - Monster Go-DJ Manual And Warranty

DIGITAL TURNTABLES SCREEN

Off Mode

When the highlight bar in the Arc Selector is positioned over the Loop Range
command, then every touch operation of the Digital Turntable is ignored.

Loop Adjust Mode

When the highlight bar in the Arc Selector is positioned over any of the Loop
commands and the Loop function is active, you can adjust the position of a
loop section by touching the turntable. When you touch the right half area of
the turntable, the loop section goes forward. When you touch the left half area
of the turntable, the loop section goes backward.
38