Slideshow - Pentax MX-1 Operating Manual

Slideshow

You can play back recorded images one after another.
1
In playback mode, use the four-way controller (45) to
choose the image to start the slideshow with.
2
Use the four-way controller (2345) to select u
(Slideshow) from the Playback Mode Palette.
3
Press the 4 button.
The slideshow setting screen appears.
4
Use the four-way controller (23)
to select [Start].
5
Press the 4 button.
The slideshow starts.
Pressing the 4 button during the slideshow pauses the slideshow.
To resume the slideshow, press the 4 button again.
6
Press any button other than the 4 button.
The slideshow stops.
To Set the Slideshow Conditions
You can set the playback interval and also a screen effect and sound
effect for when one image changes to the next.
1
Use the four-way controller (23) to select [Interval] in
Step 4 on p.129.
2
Press the four-way controller (5).
A pull-down menu appears.
Slideshow starts Slideshow starts
Start Start
Interval Interval 3 sec. 3 sec.
Screen Effect Screen Effect Wipe Wipe
Sound Effect Sound Effect
3
OK OK
129