Pentax MX-1 Operating Manual page 157

4
Use the four-way controller (23)
to select an original frame type,
and press the 4 button.
The frame setting screen appears.
5
Use the four-way controller (23)
to select [Frame Type], and press
the four-way controller (5).
6
Use the four-way controller (23) to select a frame type,
and press the four-way controller (4).
7
Set [Color] in the same way as in Steps 5 and 6.
8
Adjust the position of the frame and image.
For details, refer to "To Adjust the Position of the Frame and an Image"
(p.156).
9
Use the four-way controller (23) to select [Text Stamp],
and press the four-way controller (5).
The Text Stamp screen appears.
When you do not want to enter characters, proceed to Step 11.
10
Set up the text stamp.
For details, refer to "To Set Up Text Stamp"
(p.156).
11
Press the 4 button.
The save confirmation screen appears.
If the selected image is protected, the processed image is saved as a
new image and the confirmation dialog does not appear.
Blur Blur
Edge Composite Edge Composite
Cancel Cancel
Frame Type Frame Type
Color Color
Text Stamp Text Stamp
Position Adjustment Position Adjustment
Cancel Cancel
Text Stamp Text Stamp
Finish Finish
Delete One Character Delete One Character
Cancel Cancel Enter Enter
OK OK
Save Save
4
155