Changing The Start-Up Screen - Pentax MX-1 Operating Manual

1
Select [6. Save Menu Location] in the [A Custom 1]
menu, and press the four-way controller (5).
The [6. Save Menu Location] screen appears.
2
Use the four-way controller (23) to select [Reset Menu
Location] or [Save Menu Location], and press the 4
button.
Reset Menu
1
Location
Save Menu
2
Location
3
Press the 3 button.
The screen that was displayed before selecting the menu appears
again.

Changing the Start-up Screen

You can choose the start-up screen displayed when the camera is
turned on.
You can choose any of the following images as the start-up screen:
- The pre-installed screen
- The Guide Display Start-up Screen showing a guide for the shooting
modes and buttons
- One of the captured images (compatible images only)
1
Use the four-way controller (2345) to select x
(Start-up Screen) from the Playback Mode Palette.
2
Press the 4 button.
The image selection screen appears.
The [A Rec. Mode 1] menu ([C Movie 1] menu in C
mode or [R Setting 1] menu in playback mode) is always
displayed first. (Default setting)
The menu tab last selected is displayed first.
5
189