Changing The Sound Settings - Pentax MX-1 Operating Manual

Changing the Sound Settings

You can adjust the volume of operation and playback sounds and
change the type of sound.
1
Use the four-way controller (23)
to select [Sound] in the [W Setting
1] menu, and press the four-way
controller (5).
The [Sound] screen appears.
Subsequent steps vary depending on your
selection.
To Change the Operation Volume/Playback Volume
2
Use the four-way controller (23) to select [Operation
5
Volume].
3
Use the four-way controller (45) to adjust the volume.
Set the volume to f to mute the startup sound, shutter sound,
operation sound, and self-timer sound.
4
Change [Playback Volume] in the same way as in Steps
2 and 3.
5
Press the 3 button twice.
The screen that was displayed before selecting the menu appears
again.
To Change the Sound Type
2
Use the four-way controller (23) to select [Startup
Sound], and press the four-way controller (5).
A pull-down menu appears.
3
Use the four-way controller (23) to select the sound type.
Choose [1], [2], [3] or [Off].
4
Press the 4 button.
172
Sound Sound
Operation Volume Operation Volume
Playback Volume Playback Volume
Startup Sound Off Startup Sound Off
Shutter Sound Shutter Sound
Operation Sound Operation Sound
Self-timer Sound Self-timer Sound