Mix Buss Configuration - D&R AXUM User Manual

A·X·U·M User Manual
6.1.3

Mix buss configuration

You have to setup the busses to create the names, console assignment and functionality of the
Busses. Here we see the setup for a single console buss setup:
Figure 8: Buss configuration
•
Label
The name given to this buss.
•
2 Mono busses
It is possible to make 2 mono busses from one stereo buss. All buss-sends, to this buss, on
the module's will now include stereo to mono summing.
•
Master pre/post
You can choose the buss to be pre or post ON, level (comparable with pre/post fader) and
balance (could be your pan-pot).
•
Master level/state
This setting is used as programmed startup level, so the buss masters are in a known state.
•
Interlock
If you make a buss interlock, only 1 module can be assigned at the same time.
•
Exclusive
When routing to an Dump/Rec exclusive buss is made, the routing to all other busses on that
module will be disabled. This is useful for a so called 'dump buss'.
The selections Comm technician and Comm producer are used if you want to make a
communication buss. Such buss makes it possible to let presenters talk with hybrid or to talk
with an technician/producer.
•
Buss reset
This setting can be used to create a CUE/PFL buss with auto-reset (CUE Reset).
If you have multiple studios and CUE/PFL busses you may assign reset to multiple busses.
•
Console
You can select to which console a buss belongs.
AXUM from D&R - Phone: +31 294 418014 - E-Mail:
Version 2.5 - 2011-01-28
info@d-r.nl - 20 -