Table of Contents
Advertisement
This chapter describes the basic features and procedures for using your Notebook PC. Topics covered
include the floppy drive, CD-ROM drive, Touchpad, and other input and output devices.
Removable Storage Device Modules
Due to the BIOS booting process and for concern of power station, a hot or
warn-swapping is not permitted when you attempt to exchange the mod-
ules. Always verify the system power is off first ! Do not touch the connector
pin modules for preventing damage by static-discharge.
Data storage and retrieval are two of the most fundamental tasks you will perform when working with
your computer. The Notebook PC is equipped with a 3.5" floppy drive, a hard disk drive and a optional
high speed CD-ROM drive as usual. All of the storage devices are designed as removable modules.
The module also can be equipped with an optional LS-120 Superdisk drive, a 2nd hard disk drive, or a
DVD-ROM/RAM drive. (For more detail, contact your authorized dealer please.) The floppy drive
can coexist with CD-ROM drive through a specific external cable(PACB-FD01) connecting to the
parallel port. The following sections will cover instructions for operating each of these drives.
CHAPTER 4
USING THE NOTEBOOK PC
4
69
Hide quick links:
Advertisement
Table of Contents
