Related Manuals for Asus Goes Mobile P6000 Series
Summary of Contents for Asus Goes Mobile P6000 Series
-
Page 1: Hardware Installation
ASUSTEK COMPUTER INC. ASUS Goes Mobile P6000 Notebook Series Hardware Installation... - Page 2 A S U S P 6 0 0 0 N O T E B O O K S E R I E S Service Guide ASUSTek Computer Inc. Product Marketing and Technical Support Div. No. 150, Li-Te Rd., Peitou, Taipei, Taiwan, ROC. Phone 886-2-894-3447 •...
-
Page 3: Table Of Contents
Table of Contents ASUS P6000 KEY PARTS POINT OUT ...4 INSTALL P6000 HDD DRIVE...5 REMOVE P6000 HDD DRIVE ...6 INSTALL P6000 CD-ROM ...7 REMOVE P6000 CD-ROM...7 INSTALL P6000 FDD DRIVE...8 REMOVE P6000 FDD DRIVE ...8 CHANGE P6000 BATTERY ...9 CONNECT AN EXTERNAL FDD DRIVE ...10... - Page 4 Hardware Installation In this chapter we will describe all the components of P6000 and how to install hardware module to P6000. our P6000 has installed essential key parts. If you try to install other hardware module, you can follow the items below to complete the hardware installation.
-
Page 5: Asus P6000 Key Parts Point Out
ASUS P6000 Key Parts Point Out The illustrations below point out key parts of the P6000. 1. Microphone 3. TFT panel 5. Keyboard support 7. Speaker 9. Battery 11. Charging light 13 FDD/CD ROM drive 15 USB port 17. Docking port connector 19. -
Page 6: Install P6000 Hdd Drive
Install P6000 Hard Drive : 1. Push the hard drive into the expansion bay 2. Turnover the P6000, then screw up. -
Page 7: Remove P6000 Hdd Drive
Remove P6000 Hard Drive : 1. Turnover the P6000, remove the two screws of hard drive from the back side. 2. Pull out the hard drive. -
Page 8: Install P6000 Cd-Rom
Install P6000 CD-ROM : Put the CD-ROM into the left expansion bay, then push it straightly. To Remove CD-ROM : Turnover the P6000, use one hand to unlock the latch, another hand pull out the CD- ROM. -
Page 9: Install P6000 Fdd Drive
Install P6000 Floppy Drive : Put the floppy drive into the left expansion bay, then push it straightly. Remove P6000 Floppy Drive : Turnover the P6000, use one hand to unlock the latch, another hand pull out the floppy drive. -
Page 10: Change P6000 Battery
Change P6000 Battery : 1. Set the system into suspend state. 2. Turnover the P6000, use one hand to unlock the latch, another hand pull out the battery from the expansion bay. Unlock before remove battery 3. Put the well-charged battery into the expansion bay, then push it straightly. -
Page 11: Connect An External Fdd Drive
Plug one side of the external cable into the parallel port, and connect the other side with the FDD module as Figure shown. Connect the AC Adapter : Plug the input jack of the AC adapter to the AC connector on the P6000 and the power plug to a AC outlet. Plug to...