Asus P6300 Series User Manual page 46

Type
Select Auto to automatically detect an IDE type drive. This option only works with the built-in standard
IDE drives. If automatic detection is successful, the correct values will be filled in for the remaining
fields on this sub-menu.
To configure a drive select User. Manually enter the number of cylinders, heads and sectors per track
3
for your drive. Refer to your drive documentation or look on the drive if you need to obtain this
information. If no drive is installed or if you are removing a drive and not replacing it, select None. The
type can be set to CD-ROM in this field to support an inserted CD-ROM drive module. The type can be
set to Removable ATAPI in this field to support an inserted storage device module with IDE interface
as the primary master.
Cylinders
This field configures the drive number of cylinders. Refer to your drive documentation to determine
the correct value to enter for this field. In order to make changes to this field, the Type field must be set
to User.
Heads
This field configures the drive number of read/write heads. Refer to your drive documentation to
determine the correct value to enter for this field. In order to make changes to this field, the Type field
must be set to User.
Sectors
This field configures the drive number of sectors per track. Refer to your drive documentation to
determine the correct value to enter for this field. In order to make changes to this field, the Type field
must be set to User.
46