Table of Contents
Advertisement
Each of the options on this menu is described below.
Exit Saving Changes
Once you are finished making your selections, choose this option from the Exit menu to ensure the
values you selected are saved to the CMOS RAM. The CMOS RAM is sustained by an on-board
backup battery and stays on even when the Notebook PC is turned off. Once this option is selected, the
3
Setup program displays the following message.
Select Yes to save changes and exit.
If you attempt to exit the Setup program without saving your changes, the program will prompt
you with a message asking if you want to save your changes before exiting.
Exit Discarding Changes
This option should only be used if you do not want to save the changes you have made to the Setup
program. If you have made changes to the fields other than system date, system time and password, the
system will ask for confirmation when choosing Discard Changes and Exit.
Load Setup Defaults
This option allows you to load the default values for each of the parameters on the Setup menus. When
66
this option is selected or by pressing [F9], the following message is displayed:
Setup Confirmation
Save configuration changes and exit now?
[Yes]
[No]
Hide quick links:
Advertisement
Table of Contents
