Bottom View Descriptions
Storage Devices Module Release Knob
1
Battery Pack Release Knob
2
Memory Module Expansion Sockets Cover & Fixed Screw
3
The fixed Screws of Removable Hdd Module
4
Preparing the Notebook PC for Transport
To prepare the computer for transport, you should first disconnect all peripherals. Make sure the com-
puter is turned off before you do this. The Notebook PC's hard disk head is with self-parking. Close the
LCD panel and check that it is latched securely to the computer.
Make sure the floppy drive does not contain a diskette. When a diskette is inserted in the floppy drive
the eject button pops out. If you attempt to transport the Notebook PC with a diskette in the drive, you
risk damaging the eject button.
The computer has an soft carrying case. It will keep out dirt and dust and protect your Notebook PC's
casing from becoming scratched or cracked.
If you intend to use battery power, be sure to fully charge the battery pack and any spares. Remember
the AC adapter charges the battery pack as long as it is plugged into the computer and an AC power
source.
This concludes Chapter 1. The next chapter provides important information for
getting the Notebook PC up and running for the first time.
1
25