Maintenance And Care Before Cleaning; Cleaning - Philips LEKO LITE Luminaires Installation & User Manual

LEKO LITE Luminaires
MAINTENANCE AND CARE
1. Before Cleaning
• All cleaning should be performed with power completely removed from the luminaire.
• Never remove protective covers when luminaire is powered.
• Wear appropriate protective eye wear and gloves when cleaning the fixture.
All service and maintenance, other than described herein, should be performed by a qualified technician or
Authorized Service Center.
WARNING! THE LUMINAIRE PRODUCES EXTREME HEAT AND CAN BURN IF TOUCHED WITH BARE
HANDS. Allow unit to cool before servicing.

2. Cleaning

Additional care needs to be taken with the protective coating on the luminaire's reflector.
The following is a list of cleaning materials required to care for your LEKO LITE Luminaire:
• Lint free lens tissue
• Lint or powder free gloves
• Reagent grade isopropyl alcohol*
• A mild soap solution.
Note: *Reagent grade isopropyl alcohol is good to use on the luminaire's optics with anti-reflection coatings.
If the lens is still dirty after using isopropyl alcohol, for instance if fingerprints or oil is just redistributed and not
cleaned off the optic, then a mild soap and water solution can be used to gently wash the lens. Repeat the cleaning
with isopropyl alcohol to eliminate streaks and soap residue.
WARNING! Under no circumstances should ammonia-based cleaners, acetone, or other harsh solvents be used on or
near the LEKO LITE Luminaire. These types of cleaners or solvents can permanently damage the optics or housings
of the fixture.
If you have any questions regarding the use or care of your LEKO LITE Luminaire, please contact Philips Strand
Lighting technical support or your local Authorized Dealer.
Installation & User's Manual
13
Before Cleaning