Standards And Conformance; Compliance - Philips LEKO LITE Luminaires Installation & User Manual

Installation & User's Manual

3. Standards and Conformance

LEKO LITE Luminaires are designed to conform to the latest safety standards and requirements. The following
describes the safety and operational information on the luminaire's label.
Luminaire operational voltage range.
Do not mount luminaire on, or allow
contact with, flammable materials.
Luminaire model number. For
any warranty service, you must
provide this number and date of
purchase.
Specifies the minimum distance from the luminaire
to a flammable surface. The top figure is to a
surface in the light beam and the bottom figure to a
surface near the luminaire body.

Compliance

All LEKO LITE Luminaires are ETL-listed and conform to all applicable CE requirements. You should adhere to all
local and national safety requirements and codes when mounting and using the LEKO LITE Luminaire.
6
LEKO LITE LUMINAIRE OVERVIEW
Figure 1: Luminaire Warning Label
C
LEKO LITE Luminaires
Tmax specifies the maximum surface
temperature for the luminaire body.
Ta specifies the maximum ambient
operating temperature for the
luminaire.