Oven Performance Test - ACP AXP20 Service Manual

OVEN PERFORMANCE TEST

Note: To run Oven Performance Test the, Oven caviTy musT be aT rOOm TemPeraTure,
and the display must read micrOWave OnLy mode. see below using oven as a microwave oven.
if micrOWave OnLy is not in display you must go to user Options and activate micrOWave
OnLy option.
Changing User Options:
1. Oven must be OFF.
2. Press and hold Pad "2" for 5 seconds.
3. rotate dial to highlight: aLLOW micrOWave OnLy mode.
4. Press save.
USING OVEN AS A MICROWAVE OVEN
This option is only available if the oven cavity temperature is less than 200
When user option MICROWAVE ONLY is set as a default, the MICROWAVE
ONLY button appears on the PREHEAT MENU.
See page 14 for Oven Performance Test procedure.
To run Performance Test using microwave only follow these steps:
1. Place filled (1000 ml) test bowl in oven.
2. Press MICROWAVE ONLY button.
3. Press manual cook.
4. Press Pad 3 twice for 33 seconds.
5. Press Start.
6. Oven will beep, remove test bowl from oven.
7. Press OFF to return to PREHEAT MENU.
KEYPAD
°F
.
13
PREHEAT MENU