Download Print this page

Advertisement

Quick Links

Quick Start Reference Guide
Refer to Product Safety Manual for Safety Statements. Complete Owner's Manual available online
A
D
Attention: Included with the oven is a
"Best Practices" cleaning poster. Please
display the cleaning poster in a prominent
location close to the oven.
The high speed oven comes
preprogrammed with several menu
options. Scroll up and down with your
finger to navigate through on screen
recipes. After the oven has preheated,
the menu appears.
Cooking with Preprogrammed Pads
1. After oven has preheated to the desired temperature, open the oven door,
place food in oven and close door
2. Scroll to choose desired food item from the menu and touch the food item
you wish to cook. The cook cycle will begin and the screen will show the
remaining amount of time left in the cook cycle.
Note: If "Preheat Warming" is enabled (customized user setting, see page 6),
and preheat temperature differs from default preheat temperature, the control will
interrupt cook cycle.
To guarantee that oven reaches desired temperature before cook cycle begins,
enable "Preheat Warning" in user options.
3. At the end of the cooking cycle, the oven beeps. Remove food from oven.
Standard Preprogrammed Menu Items:
1. Breakfast Casserole
2. Breakfast Sandwich
3. Omelet
4. Tuna Melt
5. Crab Cakes
6. Pizza
7. Reuben Panini
8. Muffuletta Panini
9. Fish Tacos
©2017 ACP, Inc.
Cedar Rapids, IA 52404
|
AXP & MXP High Speed Commercial Combination Oven
Oven Clearances
A. Allow at least 2" (5.1 cm) of clearance around top of oven.
Proper air flow around oven cools electrical components.
With restricted air flow, oven may not operate properly and
B
life of electrical parts is reduced.
B. There is not an installation clearance requirement for the
back of the oven.
C
C. Allow at least 1" (2.54 cm) of clearance around sides of
oven.
D. Install oven so oven bottom is at least 3 feet (91.5 cm)
above floor.
Oven Operation
Turn the Oven On, Preheat
10. Salmon
11. Roasted Vegetables
12. Baked Potato
13. Ice Cream Sandwich
14. Grilled Pineapple
15. Chicken Wings
16. Fries
17. Shrimp
For full product documentation visit:
www.acpsolutions.com
This oven can be set to a preheat temperature
between 200°F (95°C) and 520°F (270°C).
1. Oven must be plugged in.
"Standby mode" within approximately 30 seconds.)
2. Touch the green "Power" icon
3. The preheat temperature of the oven will
appear in the display.
Touch the power key again to interrupt preheating, or
touch the blue menu icon to access user options.
(Screen will power on to
Part No. 20179916

Advertisement

loading

Summary of Contents for ACP AXP

  • Page 1 Quick Start Reference Guide AXP & MXP High Speed Commercial Combination Oven Refer to Product Safety Manual for Safety Statements. Complete Owner’s Manual available online Oven Clearances A. Allow at least 2” (5.1 cm) of clearance around top of oven.
  • Page 2: Manual Cooking

    60 minutes. Microwave, Fan and IR can be set to 11 different power levels between 0-100% with 10% increments. Note: You may also create and edit recipes using the ACP Remote Programming Interface. 1. After the oven has preheated to a desired temperature between (200-520°F / 95-270°C), touch the blue menu icon.
  • Page 3 Quick Start Reference Guide AXP & MXP High Speed Commercial Combination Oven Save a Menu Item from Manual Cook: 1. To save settings and create menu item, touch blue save icon 2. Choose a background color and image to customize the menu item.
  • Page 4 To ensure items are not lost, first backup files by exporting to USB drive. 3. When prompted, insert the flash drive into the USB port Note: First create XML file using the ACP Remote Programming Interface. See the ACP Remote Programming Interface User Guide for instructions.
  • Page 5: Log-In Information

    Caution: Uploading a new file will overwrite existing items on oven. To ensure items are not lost, first backup files by exporting to USB drive. 2. Upload zipped XML file (created by the ACP Remote Programming Interface) by following the instructions on web page, then touch the green check mark.
  • Page 6 3. Use this menu to modify oven settings. Touch the left arrow to return to the menu after making each change. Note: You may also make user options changes using the ACP Remote Programming Interface. STANDARD DEFAULT PER MODEL User Option AXP &...

This manual is also suitable for:

Mxp