Subscribe to Our Youtube Channel
Related Manuals for ACP Amana Xpress IQ AXP Series
Summary of Contents for ACP Amana Xpress IQ AXP Series
- Page 1 Ventless Submittal Information AXP & MXP SERIES 225 49 Ave. Dr. SW, Cedar Rapids, IA 52404 800-233-2366, 319-368-8120, Fax: 319-368-8198 www.acpsolutions.com...
-
Page 2: Table Of Contents
Page 2 of 26 AXP/MXP Ventless Submittal Information AXP/MXP Ventless Q&A ............... 3 ETL Listing ..................4 ETL Explanation ................5-7 Test Reports ................. 8-11 Guidelines for Ventless Use ............12 Heat Load Calculations ..............13 Specification Sheets ..............14-17 Quick Start Reference Guide ............ -
Page 3: Axp/Mxp Ventless Q&A
What if local inspector questions ventless installation? ACP, Inc. will assist with approvals. In general you need to notify the appropriate local agency having jurisdiction (AHJ) and prepare a submittal package including menu items. ACP, Inc. can provide additional information to assist and guide you through the process. -
Page 4: Etl Listing
Page 4 of 26 225 49 Ave. Dr. SW, Cedar Rapids, IA 52404 800-233-2366, 319-368-8120, Fax: 319-368-8198 www.acpsolutions.com... -
Page 5: Etl Explanation
Page 5 of 26 COMMERCIAL ELECTRIC COOKING APPLIANCES - UL 197 MARCH 17, 2010 PART 1 - ALL APPLIANCES INTRODUCTION 1 Scope 1.1 These requirements cover commercial electric cooking appliances rated 600 volts or less, intended for indoor use, and intended f o r use in accordance with the National Electrical Code, NFPA 70. 1.2 These requirements cover coffee makers, conductive cookers, food warmers, fryers, griddles, steam kettles, steam cookers, nut warmers, popcorn machines, ranges, utensil warmers, and other appliances f o und in commercial kitchens, restaurants, or other business establishments where food is dispensed. - Page 6 Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report. This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be applied only at the location of the Party Authorized To Apply Mark. ACP Inc. ACP Inc. Applicant: Manufacturer: 225 49th Ave.
- Page 7 Report. This authorization also applies to multiple listee model(s) identified on the correlation page of the Listing Report. This document is the property of Intertek Testing Services and is not transferable. The certification mark(s) may be applied only at the location of the Party Authorized To Apply Mark. ACP Inc. ACP Inc. Applicant: Manufacturer: 225 49th Ave.
-
Page 8: Test Reports
Page 8 of 26... - Page 9 Page 9 of 26...
- Page 10 Page 10 of 26 22887 NE Townsend Way Fairview, Oregon/USA, 97024 Telephone: 503-676-2311 Facsimile: 503-676-2350 Conforming Reciprocity Letter Report www.intertek.com 225 49 Avenue Drive Southwest Cedar Rapids, IA 52404 sduffy@acpsolutions.com Subject: EPA 202 Reciprocity findings letter of the Convection Ovens, MXP22, AXP22 given information provided in ETL test report 3196558MIN-001 and UL file E40456 for EPA 202 testing compliance.
- Page 11 Page 11 of 26 Accelerated Cooking Products Intertek Report : No: 101234673PRT-001 Conforming Reciprocity Letter Report Completed by: Jared T. Sorenson Reviewed by: Bruce S. Davis Title: Team Leader Title: Associate Engineer Signature: Signature Date June 19, 2013 Date: June 19, 2013 Please note: this Letter Report does not represent authorization for the use of any Intertek certification marks.
-
Page 12: Guidelines For Ventless Use
Page 12 of 26 ACP, Inc. Guidelines for Ventless Use The AXP / MXP High Speed Oven conforms to UL 923, EPA202 and NFPA96. The UL 923 standard covers the electrical and product safety standard. The EPA202 and NFPA96 standard covers the low particulate matter emissions standard to which we conform. While both standards cover different aspects of the oven, they both overlap as it relates to grease and fire handling. -
Page 13: Heat Load Calculations
Page 13 of 26 AXP/MXP Estimated Heat Load Calculations AXP22TLT/MXP22TLT (single phase) Parameters Operating Time 12 Hours Energy Costs $0.11 KWHr Idle Time 2 Hours Cook Cycles/Daily Typical Cook Time 60 Seconds Balance of Time Power Data Cost/Day Time (Minutes) (Watts) (Hours) Warm Up... -
Page 14: Specification Sheets
225 49th Ave. Dr. SW Cedar Rapids, IA 52404 U.S.A. 800-233-2366 319-368-8120 Fax: 319-368-8198 www.acpsolutions.com Amana is a trademark of Maytag Properties, LLC or its related companies. Manufactured under license by ACP, Inc. Limited warranty provided by manufacturer. © 2019 ACP, Inc. - Page 15 728028377125 30 A, single phase 6-30P (1.5 m) single phase Part No. 20271201 225 49th Ave. Dr. SW, Cedar Rapids, IA 52404 U.S.A. Updated 06/28/19 800-233-2366 • 319-368-8120 • Fax: 319-368-8198 www.acpsolutions.com © 2019 ACP, Inc., Cedar Rapids, Iowa 52404...
- Page 16 • Equipment stand Service All ACP, Inc. commercial ovens are supported All products are backed by the ACP, Inc. by our Culinary Center. Do not hesitate to 24/7 ComServ Support Center contact us for any questions regarding food preparation, menu development and cooking Warranty times: testkitchen@acpsolutions.com...
- Page 17 728028423198 30 A, single phase Wire (5 ft.) single phase Part No. 20271202 225 49th Ave. Dr. SW, Cedar Rapids, IA 52404 U.S.A. Updated 06/28/2019 800-233-2366 • 319-368-8120 • Fax: 319-368-8198 www.acpsolutions.com © 2019 ACP, Inc., Cedar Rapids, Iowa 52404...
-
Page 18: Quick Start Reference Guide
1. Oven must be plugged in. (Screen will always use recommended cleaning supplies: power on to “Standby mode” within approximately Damp towel, plastic scouring pad, ACP Oven Cleaner 30 seconds.) 2. Touch the green “Power” icon and ACP Oven Shield Protectant 3. - Page 19 Maximum total cook time is 99:99. Individual stages cannot exceed 60 minutes. Microwave, Fan and IR can be set to power levels between 0-100%. Note: You may also create and edit recipes using the ACP Programming Application. 1. After oven has preheated touch blue menu icon.
- Page 20 Move a recipe out of a folder: Touch, hold and drag the recipe to the top of the screen For full product documentation visit: Part No. 20269801 ©2019 ACP, Inc. www.acpsolutions.com Revised 6/2019 Cedar Rapids, IA 52404...
- Page 21 USB Flash Drive and ready to use in ACP Programming Application. Open Menu in ACP Programming Application Note: For more comprehensive instructions, see ACP Programming Application User Guide online 1. Insert flash drive into USB port on computer.
- Page 22 Oven will begin cooling down. Touch the red stop icon to return to home screen. Menu items and settings will be uploaded and ready to use. For full product documentation visit: Part No. 20269801 ©2019 ACP, Inc. www.acpsolutions.com Revised 6/2019 Cedar Rapids, IA 52404...
- Page 23 2. Scroll down and touch to select “User Options.” 3. Use this menu to modify oven settings. Touch the left arrow to return to the menu after making each change. Note: You may also make user options changes using the ACP Programming Application. STANDARD DEFAULT PER MODEL User Option AXP &...
-
Page 24: Application For Exemption From Mechanical Ventilation
Page 24 of 26 APPLICATION FOR EXEMPTION FROM MECHANICAL VENTILATION Applicant Name(s):____________________________________________ Telephone: _______________________ Applicant Name(s):____________________________________________ Telephone: _______________________ Facility Name: _________________________________________________________________________________ Facility Address: _______________________________________________________________________________ Facility Type: Restaurant ____ Market ______ Bakery _______ Other ____________________________ Appliance Type (rotisserie, oven, etc.): ______________________________________ Weight: __________ Equipment Manufacturer: ________________________________________________________________________ Address: _____________________________________________________________________________________... -
Page 25: La County Exemption From Mechanical Ventilation Letter
Page 25 of 26... - Page 26 Page 26 of 26...
Need help?
Do you have a question about the Amana Xpress IQ AXP Series and is the answer not in the manual?
Questions and answers