Table of Contents
Advertisement
Quick Links
Owner's Manual
Commercial Combination Oven
(Microwave and Convection)
Keep these instructions for future
reference. If the equipment changes
ownership, be sure this manual
accompanies equipment.
Original Instructions
FOR COMMERCIAL USE ONLY
This manual covers models:
Contents
Model Identification ................................... 2
Important Safety Information...................... 3
Grounding Instructions .............................. 5
Installation ................................................. 5
Display and Features ................................ 6
Programming ............................................. 9
Convection Cooking ................................ 10
(microwave and convection) .................11
User Options ........................................... 13
Care and Cleaning .................................. 15
Before Calling Service ............................. 16
ACE*, JET*
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for ACP ACE series
Summary of Contents for ACP ACE series
-
Page 1: Table Of Contents
ACE*, JET* This manual covers models: Owner’s Manual FOR COMMERCIAL USE ONLY Contents Model Identification ........2 Important Safety Information...... 3 Grounding Instructions ......5 Installation ..........5 Display and Features ........ 6 Programming ..........9 Convection Cooking ........ 10 Combination Cooking Commercial Combination Oven (microwave and convection) ....11... -
Page 2: Model Identification
Model Identification When contacting ACP, provide product information. Product information is located on oven serial plate. – Inside the U.S.A. or Canada, call toll-free at 866-426- Record the following information: 2621. Model Number: _____________________________ – Outside the U.S.A. and Canada, call 319-368-8120. -
Page 3: Important Safety Information
(broken or loosened) door seals and sealing surfaces. D. The oven should not be adjusted or repaired by anyone except properly qualified service personnel. SAVE THESE INSTRUCTIONS ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 3 of 16... - Page 4 14. An authorized servicer MUST inspect equipment Do not use aluminum foil in oven annually. Record all inspections and repairs for future use. SAVE THESE INSTRUCTIONS ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 4 of 16 Revised 06/29/2017...
-
Page 5: Grounding Instructions
C—Allow at least 1” (2.54 cm) of clearance around sides of oven. D—Install combination oven so oven bottom is at least 3 feet (91.5 cm) above floor. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 5 of 16... -
Page 6: Display And Features
Preheat On/Off pad. Oven Preheating and set temperature OVEN PREHEATING shows in display after pressing Preheat On/Off pad. (example of 475°F OR 250°C 475°F shown) ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 6 of 16 Revised 06/29/2017... - Page 7 ITEM-05 STAGE:1 after pressing a single (or double) digit pad while in Ready Mode. 01:23 MW:50% Time left Percentage in cooking of microwave program power ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 7 of 16 Revised 06/29/2017...
- Page 8 (1 through 4) indicates the stage that is being used. USB Display DISPLAYS DESCRIPTION Displays when keypad 5 is pressed and held and transfer to or from USB flash drive is ready ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 8 of 16 Revised 06/29/2017...
-
Page 9: Programming
• Up to four different stages can be programmed. Press Program Save pad to save the program and changes. To discard changes, press Stop/Reset pad before pressing Program Save pad. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 9 of 16... -
Page 10: Convection Cooking
If stage cooking is desired, press Stage pad and repeat steps 4, 5, and 6. • Up to 4 different stages can be programmed. Press the Start pad to begin the cooking cycle. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 10 of 16... -
Page 11: Combination Cooking (Microwave And Convection)
If stage cooking is desired, press Stage pad and repeat steps 4, 5, and 6. • Up to 4 different stages can be programmed. Press the Start pad to begin the cooking cycle. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 11 of 16... -
Page 12: Microwave Cooking (Microwave Only)
4. If stage cooking is desired, press Stage pad and repeat steps 2, and 3. • Up to 4 different stages can be programmed. Press the Start pad to begin the cooking cycle. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 12 of 16... -
Page 13: User Options
Oven will display “Clean Filter Message” every ninety (90) days. POWER LEVEL PAD Disabled Oven will not operate in “Microwave Only” mode. Microwave Only Enabled Oven will operate in “Microwave Only” mode. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404 Page 13 of 16 Revised 06/29/2017... -
Page 14: Usb Flash Drive Operating Instructions
1. NO USB: Remove flash drive from USB and reinsert flash drive into USB and retry. 2. RESET OVEN: Unplug oven from outlet and plug in oven and retry transfer. ©2017 ACP, Inc. Part No. 20000609 Cedar Rapids, IA 52404... -
Page 15: Care And Cleaning
FOR A NEW OVEN: before using it the first time, spray damp towel with ACP Oven Shield and wipe all interior surfaces. Do not remove Oven Shield Oven Protectant (Item# SH10). Turn oven on and pre-heat to start cooking. -
Page 16: Before Calling For Service
(example) • Disconnecting electrical supply may eliminate service code. • If failure continues, contact an authorized servicer. Do not use oven until contacting the ACP Servicer. Oven fan turns on while oven is Normal operation. not preheating or cooking. or full product documentation visit: www.acpsolutions.com...
Need help?
Do you have a question about the ACE series and is the answer not in the manual?
Questions and answers