System Programming Overview - ESI 50L Administrator's Manual

ESI-50L Programming Manual

System programming overview

1 System parameters
13 Administrator password
14 System clock
141 Set time/date
142 Automatic time setting
143 Clock adjustment
16 System feature parameters
162 Connect tone
163 Station feature set activation
17 System speed-dial
3 Extension programming
32 Extension feature authorization
37 RFID programming
371 Access schedules
372 RFID tag programming
373 View RFID tag numbers
374 ESI Presence Management parameters
375 ESI Presence Management Reader parameters
1
30 Station move
Entering programming mode
You may program from any 24-Key or 48-Key Digital Feature Phone
1. Press PROGRAM
2. Press HOLD. The "enter password" prompt will play.
3. Enter the Administrator password (default is 4 5 6).
wait two seconds. You are now in programming mode. The extension will be automatically placed in
DND, and its display will show:
ADMINISTRATOR
CMD:
4. The system will play the system programming menu. Follow it to program as you wish.
5. When finished, hang up.
Warning: Always FINISH programming in ANY function BEFORE exiting programming mode (as needed,
press # to accept current entries for function parameters you're not changing).
Note: The system will automatically exit programming mode after 10 minutes of inactivity.
Example: If your Administrator password is 864, enter programming mode by pressing PROGRAM HOLD 8 6 4 #. (To
exit programming mode, hang up.)
1
Shown in the same order as it appears in the programming menu on an ESI desktop Feature Phone.
2
Although a 12-Key Feature Phone allows you to enter Installer and Administrator programming, we don't recommend that you use a 12-Key
Feature Phone for programming because of its one-line display and small number of programmable feature keys.
3
Or, if using the 24-Key Feature Phone, press PROG/HELP.
4
If you prefer to enter Administrator programming mode, use the Administrator password, instead (the default is 4 5 6).
3
at any digital station. The normal station programming menu prompts will begin to play.
System programming: An introduction
5 Voice mail programming
53 Guest/info mailboxes
54 Group mailboxes
55 Message notification options
551 Station delivery options
552 Delivery/paging parameters
56 Cascade notification mailboxes
57 Q & A mailboxes
6 Recording
61 Record system prompts
62 Record directory names
63 MOH programming
631 MOH source
632 Record MOH
633 MOH volume
7 Reports
72 ESI Presence Management access door report
74 Voice mail statistics report
75 System speed-dial list
2
in the system:
4
Then, to confirm the password, either press # or
B.3