Set Up Area Code; Enable Call Timer; Select Date/Time Format - Nortel Meridian M3902 Quick Reference Manual

Options List

Set up area code

Using the Area code set-up option (available on the M3904), causes the Callers
List and Calling Line ID (CLID) display show the number/extension followed by the
area code/prefix in parenthesis. This makes it easier to identify local calls and
internal calls. You can define up to three area codes. After you select Area code
set-up from the
Options List
1st Code: 408
2nd Code:
3rd Code:
Press the Key to save changes. Press the
Done

Enable Call timer

The Call timer enable option measures how long you are on each call. After you
select Call timer enable from the
On
or
Off
Press the Done Key to save changes. Press the

Select Date/time format

There are eight Date/time formats. Four formats are based on the 12 hour clock
and four are based on the 24 hour clock. After you select Date/time format. . .
from the Options List
Format 3
Press the Key to select the highlighted format. Press the
Done
Key to exit.
22
menu
Note: You can enter up to three codes of
your choice.
Options List
menu;
Use the Navigation
cursor in the first line and enter an
area/country code
Key or
Quit Options
menu;
From the Call timer
Key to turn on the Call timer.
On
or
Press the Off Key to turn off the Call
timer.
Quit Key or Options
Use the Navigation
through the eight formats.
Quit
keys to place your
of your choice.
Key to exit.
screen, press the
Key to exit.
Keys to scroll
Key or
Options