Hard Disk Drive Removal; Server Installation - IBM TotalStorage DS4300 Installation, User's, And Maintenance Manual

Figure 14. Hard disk drive removal
8. Remove the white screws and nuts 1 from the storage subsystem bezel; then
Figure 15. Server installation
9. Reverse step 1 through step 4 to reinstall the components that you removed. To
28
IBM TotalStorage DS4300 Fibre Channel Storage Subsystem: Installation, User's, and Maintenance Guide
4
slide the storage subsystem into the rack. Align the bezel locator pins and
attach the bezel with two M6 screws 2 ; then install and tighten the 6-32 in.
screws 3 .
8
8
cable the DS4300 to the host and the storage expansion enclosure, see
Chapter 3, "Cabling the storage subsystem," on page 29.