Front Brake Fluid Level Inspection And Adjustment; Rear Brake Fluid Inspection And Adjustment - Triumph Tiger 800 User Manual

Front Brake Fluid Level Inspection
and Adjustment
1. Front brake fluid reservoir, upper
level line
2. Lower level line
The brake fluid level in the reservoirs must be
kept between the upper and lower level lines
(reservoir held horizontal).
To inspect the fluid level, check the level of
fluid visible in the window at the front of the
reservoir body.
To adjust the fluid level, release the cap
screws and detach the cover noting the
position of the sealing diaphragm.
Fill the reservoir to the upper level line using
new DOT 4 fluid from a sealed container.
Refit the cover, ensuring that the diaphragm
seal is correctly positioned between the cap
and reservoir body. Tighten the cap retaining
screws to 1.5 Nm.
Maintenance and Adjustment
Rear Brake Fluid Inspection and
Adjustment
2
1
3
2
j
1. Rear brake fluid reservoir
2. Upper level line
3. Lower level line
To inspect the fluid level:
The reservoir is visible from the right hand
side of the motorcycle, forward of the exhaust
intermediate pipe, below the rider's seat.
To adjust the fluid level:
Remove the reservoir cap. Fill the reservoir to
the upper level line using new DOT 4 fluid
from a sealed container.
Refit the reservoir cap ensuring that the
diaphragm seal is correctly fitted.
1
91