Headlights - Triumph Tiger 800 User Manual

Maintenance and Adjustment
Note:
• The starter solenoid
additional 30 Amp fuse, attached
directly to the solenoid, beneath
the rider's seat.
108

Headlights

has an
Headlights
Adjust road speed to suit the visibility and
weather conditions in which the motorcycle
is being operated.
Ensure that the beams are adjusted to
illuminate the road surface sufficiently far
ahead without dazzling oncoming traffic.
An incorrectly adjusted headlight may
impair visibility causing an accident.
Never attempt to adjust a headlight beam
when the motorcycle is in motion.
Any attempt to adjust a headlight beam
when the motorcycle is in motion may
result in loss of control and an accident.
If the motorcycle is to be used under
closed-course conditions, you may be
asked to tape the visible outer surface of
the headlight.
When taped, the headlight will overheat
and distort the outer surface. Therefore, to
avoid headlight
disconnect the headlights when they are
taped for
conditions.
Warning
Warning
Caution
distortion, always
use under closed-course