Starter Button; Left Handlebar Switches; Headlight Dip Switch - Triumph Tiger 800 User Manual

Tiger 800 and tiger 800xc motorcycles
Hide thumbs Also See for Tiger 800:
Table of Contents

Advertisement

Caution
Do not leave the ignition switch in the
ON position unless the engine is running
as this may cause damage to electrical
components and will discharge the battery.

Starter Button

The starter button operates the electric
starter. For the starter to operate, the clutch
lever must be pulled to the handlebar.
Note:
Even if the clutch lever is pulled to
the handlebar, the starter will not
operate if the side stand is down
and a gear is engaged.
With the engine running, the starter button
functions as the lap timer 'trigger' button.
Momentarily pressing the starter button will
start the lap timer recording the next lap.
General Information

Left Handlebar Switches

4
3
ccmg

1. Headlight dip switch

2. Direction indicator switch
3. Horn button
4. Pass button
Headlight Dip Switch
High or low beam can be selected with the
headlight dip switch. To select high beam,
push the switch forward. To select low beam,
push the switch rearwards. When the high
beam is turned on, the high beam indicator
light will illuminate.
Note:
A lighting on/off switch is not
fitted to this model. The headlight,
rear light and licence plate light all
function automatically when the
ignition is turned to the ON
position.
1
2
39

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Tiger 800xc

Table of Contents