HYT TC700 Manual page 24

Channel Announce Temporary Enable
When you press the preprog
modes can be programmed:
M ode 1 (report the current channel number at the beginning)
● Two Beeps sound in
inactivated; turn on the power again to activate this feature, the radio reports the
current channel number.
● A Beep sounds indicating that the Channel Announce feature is temporarily
activated; this feature remains activated even if the radio is po
Mode 2 (not repo rt the current channel number at the beginning)
● Two Beeps sound indicating that the C
inactivated; this feature remains inactivated even if the radio is powered on again.
● A Beep sounds indica
activated; turn on the power again to inactivate this feat
Channel Announce Enable
When you press the preprogrammed Chan
programmed:
Mode 1
Two Beeps sound indicating that the Channel Announce feature is inac
won't report the current channel number even if it is powered on again.
Mode 2
A Beep sounds and the radio reports the current number; the Channel Announce feature
remains activated even if the radio is powered on again.
Communication Range Alert
rammed Channel Announce Temporary Enable key, two
dicating that the Channel Announce feature is temporarily
hannel Announce feature is temporarily
ting that the Channel Announce feature is temporarily
nel Announce Enable key, two modes can be
24
wered on again.
ure.
tivated; the radio