Chapter 1: Introduction - MATSONIC MS9147C Series User Manual

Mainboard
Hide thumbs Also See for MS9147C Series:
Table of Contents

Advertisement

1: Introduction
Chapter 1
Introduction
This mainboard has a Socket-478 processor socket for Intel
Pentium 4 type of processors supporting front side bus (FSB)
speeds up to 533 MHz
.
This mainboard has the VIA P4X333 Northbridge and
VT8235/8233ACE Southbridge chipsets that support AC 97 audio
codec, and provide Ultra DMA 33/66/100/133 function. If the
VT8235 SB is installed, the mainboard supports built -in USB 2.0
providing higher bandwidth, implements Universal Serial Bus
Specification Revision 2.0 and is compliant with UHCI 1.1 and
EHCI 0.95; if the 8233ACE SB, it doesn't support USB2.0 and
without LAN. This mainboard has four 32-bit PCI slots, one
4xAGP slot, one CNR (Communications and Networking Riser)
slot, and an onboard 10BaseT/100BaseTX Network interface
(optional).
There is a full set of I/O ports including two PS/2 ports for mouse
and keyboard, two serial ports, one parallel port, one MIDI/game
port and maximum six USB ports --two back-panel ports and
onboard USB headers make four extra USB ports by connecting
the Extended USB Module to the mainboard.
This mainboard is an ATX mainboard that uses a 4-layer printed
circuit board and measures 305 x 244mm.
1

Advertisement

Table of Contents
loading

Table of Contents