Pci/Plug And Play Setup Page - MATSONIC MS9147C Series User Manual

PCI / Plug and Play Setup Page
This page sets up some parameters for devices installed on the PCI
bus and those utilizing the system plug and play capability.
AMIBIOS SETUP – PCI / PLUG AND PLAY SETUP
(C) 2000 American Megatrends, Inc. All Rights Reserved
Plug and Play Aware O/S
Primary Graphics Adapter
Allocate IRQ for PCI VGA
PCI IDE BusMaster
Enable this item if you are using an O/S that
Plug and Play
supports Plug and Play such as Windows 95
Aware O/S
or 98.
This item indicates if the primary graphics
Primary
adapter uses the PCI or the AGP bus. The
Graphics
default AGP setting still lets the onboard
Adapter
display work and allows the use of a second
display card installed in an AGP slot.
If this item is enabled, an IRQ will be
Allocate IRQ
assigned to the PCI VGA graphics system.
for PCI VGA
You set this value to No to free up an IRQ.
This item enables or disables the DMA
PCI IDE
under DOS mode. We recommend you to
BusMaster
leave this item at the default value.
3: BIOS Setup Utility
Yes
AGP
Yes
Disabled
↑↓←→ : Select Item
ESC : Quit
F1 : Help PU/PD/+/ - : Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
33