Entering The Viewfinder Menu System; Finding Your Way - GRASS VALLEY DMC 1000 User Manual

Chapter 4 - Menu navigation

4.4.2 Entering the viewfinder menu system

Press the Select button after the camcorder is switched on, the message MENU OFF appears in
the viewfinder. Press the Select button again while this text is showing, the MAIN menu
appears in the viewfinder.
Menu off
VF
Video
Setup
Audio
MENU: MAIN
System
The MAIN menu screen shows five items. The name of the menu is shown below these. Four
more items are hidden but become visible when you scroll down using the Rotary control. A
cursor shows your position in the menu. The Rotary control moves the cursor up and down.

4.4.3 Finding your way

Use the Rotary control to move the cursor through the menu items. If a double arrow (>>) is
visible, then pressing the Select button brings you one level lower in the menu system. Only
five items are visible at the same time in each menu. Scroll up or down to see any additional
items. When you first enter a menu (other than the MAIN menu) the cursor is positioned next
to the first item.
The TOP and PREVIOUS entries are not immediately visible but are located above the first
item. Use the rotary control to scroll up to them.
– Select TOP to bring you back to the MAIN menu.
– Select PREVIOUS to go back to the menu that you were in before the current one.
The VF menu, for example, shows the items displayed when you first enter the menu. The
other items are available by scrolling up or down with the Rotary control.
TOP
PREVIOUS
Monitoring
Detail
Focus assist
Zebra
Indicators
MENU: VF
Markers
60
exec
Y
>>
Off
>>
>>
DMC 1000 Digital Media Camcorder User's Guide (v4.0)