Table of Contents
Advertisement
Chapter 2
Attaching parts
2.1 Mounting a lens
Attach a lens to the camcorder as follows:
Caution
Do not attach a lens weighing more than 5 kg (11 lbs) to the camcorder without a lens support.
1.
Ensure that the lens locking ring
as seen from camcorder front.
2.
Remove dust protection cap
3.
Hold the lens so that the positioning pin aligns with the notch of the lens mount. Fit the
lens into the lens mount and hold it in place.
4.
Turn the lens locking ring
5.
Connect the lens cable to the lens connector
6.
Place the lens cable into the bottom clip at the front of the camcorder and the clip located
at the side.
DMC 1000 Digital Media Camcorder User's Guide (v4.0)
is in the unlocked position - turned counterclockwise
.
clockwise to lock the lens in place.
at the right side of the camcorder.
1
3
Chapter 2 - Attaching parts
2
25
Advertisement
Table of Contents
