Setting Up Communication; Usb Connection - GRASS VALLEY DMC 1000 User Manual

Chapter 10
Communications

10.1 Setting up communication

The camcorder has two RJ-45 Ethernet connectors (one for future use), two USB host
connectors, one USB device connector (future use) and an IEEE 1394 connector.
USB
connector
(host)

10.2 USB connection

The USB host connectors on the top-rear panel and right-side panel can be used to connect a
USB mass storage drive or other device. The connection does not need further configuration.
☞ ☞
Note Note
Do not plug or unplug USB devices while the camcorder is being used for critical play to air
activity.
Maximum combined power load that can be drawn from the USB ports is 0.25 W.
DMC 1000 Digital Media Camcorder User's Guide (v4.0)
IEEE
1394
connector
Chapter 10 - Communications
Ethernet RJ-45
Ethernet RJ-45
connector
(future use) connector
Network 2 Network 1 USB B USB A
USB connector B USB
connector A
(device)
(future use) (host)
111