Sirius XM RAdio Stratus7 User Manual page 30

Vehicle Installation
stripping . Run the cable inside of the weather stripping to the
bottom of the door opening .
3. Pull the cable out of the weather stripping at the bottom of the
door opening and route it under the carpet toward the dashboard .
Coil any excess cable in a hidden location, such as under the carpet,
keeping it away from any vehicle pedals or controls . Secure the
excess cable with wire ties .
4. Bring the end of the cable out at the PowerConnect Vehicle Dock
location . Leave yourself enough cable so you can easily connect it to
the antenna connector of the dock .
5. Continue with "Step 5: Connect the Magnetic Mount Antenna and
PowerConnect Power Adapter" on page 34 .
Sport Utility Vehicle (SUV):
1. Feed the antenna cable underneath the rubber weather stripping
of the rear tailgate window/door and route the cable along the rear
hatch . Lift the weather stripping from the opening and tuck the
cable inside it, then replace
the weather stripping . Pull
the cable out from weather
stripping and route it into the
cabin under the interior trim .
Avoid hinges or gears that
could crimp or cut the cable .
2. Route the cable through the
SUV's main cabin area under
the interior trim, towards the
front of the vehicle . Use a
30