Sirius XM RAdio Stratus7 User Manual page 13

Vehicle Installation
vehicle . When the orientation is correct, tighten the knob .
Knob Adhesive Foot
4. Attach the Dash Mount to the
PowerConnect Vehicle Dock using the 4
provided screws .
5. Clean the mounting surface in the vehicle
with the alcohol preparation pad and let
it dry thoroughly .
6. Peel off the adhesive liner . Position, press,
and hold the Dash Mount and PowerConnect
Vehicle Dock in place for 30 seconds .
IMPORTANT! Allow the Dash Mount adhesive to
cure (dry) for a minimum of 2-4 hours before
using the mount . The best adhesion occurs after 24 hours .
TIP! To remove, carefully lift the adhesive pad with your fingers or a spoon .
Warming the pad with a hair dryer for several minutes will help soften the
adhesive .
Dock Mounting Plate
13