Table of Contents
Advertisement
Vehicle Installation
2 Attach the Rubber Tail to the antenna
and press the antenna cable into the
Rubber Tail . The Rubber Tail will help
to position the antenna the correct
distance from the edge of the roof or
trunk lid .
3 Clean the surface of the selected
mounting location using the alcohol
preparation pad and let it dry
thoroughly .
4 Follow the Tips and Cautions shown on
the next several pages, and place the
antenna in the location you selected .
Peel the protective material from the adhesive strips and press the
Rubber Tail firmly into place on the vehicle .
5 Continue to press firmly down on the Rubber Tail for another 30
seconds . At room temperature (68° F), maximum adhesion usually
occurs within 72 hours . During this period, avoid car washes and other
contact with the antenna and the Rubber Tail .
18
Magnetic Mount Antenna
(Upside-Down)
Protective
Material
Rubber
Antenna
Tail
Antenna Cable
Strain
Relief
Advertisement
Table of Contents
