Vehicle Installation
Installing the Vent Mount:
1. Locate a vent with horizontal louvers
sturdy enough to hold your PowerConnect
Vehicle Dock and Stratus 7 Radio .
2. If the vent louvers in your vehicle are
recessed, you may need to use the longer
vent clamps with the Vent Mount . If so,
Remove the shorter vent clamps and install
the longer ones into the Vent Mount . Be
sure to observe the orientation of the vent
clamps as shown .
Remove End Cap
Slide Extended Vent Clamps In
14
Extended Vent Clamps
Short Vent
Clamps
Slide Short Vent Clamps Out
Replace End Cap