Mount - Sirius XM RAdio Stratus7 User Manual

Vehicle Installation
3. Attach the Vent Mount to the
PowerConnect Vehicle Dock using the 4
provided screws .
Note! For greater clarity, the next
illustration does not show the dock
attached to the Vent Mount, however, the
dock should be attached before
continuing .
4. Push the Vent Mount onto the vehicle vent as shown (1) until it hooks
on the rear of the vent louver (2) .
PUSH
5. Rest the foot against the bottom of the vent (2), and adjust the tilt of the
Vent Mount by repositioning the foot to a different adjustment hole (3) .
TIP! To remove the Vent Mount, push the mount into the vent . Then lift up
until disengaged from the rear of the vent louver, and remove the Vent

Mount .

1
Dash
Vent
FOOT
Louver
2
Dash
HOOKED
Vent
ADJUSTMENT
3
Dash
Vent
TILT
HOLES
15