Lan Configuration - TANDBERG 880 User Manual

Videoconferencing system

Hide thumbs Also See for 880:

Table of Contents

Installation

ISDN configuration

For each installation of the system it is necessary to configure the unit. All configuration parameters are available

via the menu system.

• Press M

on the remote control. Select the menu 'Terminal Settings', then 'Network'.

ENU

Specify the settings for the network.

For details, follow the instructions in chapter 'Terminal Settings', 'Network Configuration' in this manual.

For further information refer to the examples in:

Appendix 1: Connecting the system to ISDN using NT1 network adapters

Appendix 2: Connecting the system to the Switched 56 network

LAN configuration

• Press M

on the remote control. Select the menu 'Terminal Settings', then 'LAN Settings'.

ENU

Specify the necessary LAN settings according to the instructions from your LAN administrator. If there is an

H.323 Gatekeeper present on your LAN, see also 'H.323 Settings'.

For details, follow the instructions in chapter 'LAN Settings' in this manual.

TANDBERG Videoconferencing System

Table of Contents