Lan Configuration - TANDBERG Videoconferencing System Short User Manual

Installation
ISDN-BRI Settings
ISDN switch type
Select the type of ISDN network connected to your unit.
Line setup
This menu allows you to program the numbers associated with your ISDN line.
If you want to use this ISDN line, you need to set 'Enabled: On' and enter the numbers of your ISDN line. If some
of the ISDN lines are not to be used, set 'Enabled: Off'. Line 1 should always be enabled.

LAN configuration

• Press M on the remote control. Select the menu 'Terminal Settings', then 'LAN Settings'.
ENU
Specify the necessary LAN settings according to the instructions from your LAN administrator. If there is an
H.323 Gatekeeper present on your LAN, see also 'H.323 Settings'.
TANDBERG Videoconferencing System
16
M ISDN-BRI
ANDATORY
NOTE
T
O MAKE SURE YOUR SYSTEM WILL WORK PROPERLY
ISDN-BRI,
USING MAKE THE FOLLOWING
:
SETTINGS
- S ISDN
ET SWITCH TYPE
- E ISDN
NTER LINE NUMBERS
)
REQUIRED
- D
ISABLE UNUSED LINES
SETTINGS
(+ SPID
S IF